Professional Use Guide — Estheticians & Clinicians

Professional Use Guide — Estheticians & Clinicians

This guide is for estheticians, clinicians, and anyone using the Artemis mask in a professional setting with multiple clients.

Between Clients — Sterilization

Face mask: Always sterilize the mask between clients using the Artemis UV Sterilizer Case. Place the mask inside, close the zipper, and plug in via USB-C. The UV light will sanitize the mask while it charges.

Neck plate: The UV sterilizer case is designed for the face mask only and cannot fit the neck plate. To clean the neck plate between clients, wipe it down with:

• Barbicide wipes
• Cavi-Wipes — available here
• Any equivalent non-alcohol, hospital-grade disposable wipe

If there is any visible residue on the face mask before placing it in the UV case, wipe it down first with the same products above.

Do not use alcohol-based wipes as these can damage the device surfaces over time.

Session Settings

For professional use, clients are unlikely to receive daily treatments, so higher intensity is recommended to maximize each session:

• Intensity: Level 8–10
• Session length: 30 minutes
• Mode: Expert Mode (recommended for targeted, customized treatment)

Using Expert Mode for Clients

Expert Mode gives you full control over which colors are applied to which areas of the face — ideal when a client has multiple or localized concerns.

Diagnosis Mode — Adjust treatment based on specific skin concerns using a slider. Good for clients whose needs you already know well.

Manual Mode — Assign different colors to each of the 16 facial zones individually. Select a color, tap the zone on the face map, and repeat until the full face is covered. Then set intensity and time.

See the Complete Mask Guide for a full walkthrough of Expert Mode.

Saving Client Programs

You can save up to 5 programs in the app for quick recall between sessions. Once you've dialed in a client's ideal settings, save it as a program so you can pull it up instantly at their next appointment. Programs are accessible from the home screen under PGM and can be overwritten at any time.

Recommended Workflow Per Client

1. Confirm client's skin concerns and goals
2. Select the appropriate mode and colors (see LED Color Guide and Auto Mode Guide)
3. Ensure client has a clean, product-free face before starting
4. Run session at intensity 8–10 for 30 minutes
5. After session, client can apply their full skincare routine
6. Wipe down neck plate with Barbicide or Cavi-Wipes; place face mask in UV sterilizer case before the next client

Questions? Reach out at i@artemismask.com — we're happy to support professional users.

With Love & Light, The Artemis Team